	When urodynamics lab measurement can tell only an hour of the story... send acquilog home for the remainder Data review and analysis is carried out with the Acquidata Uromac software already supplied with Acquidata Uromac Lab based urodynamics systems

	multi-channel ambulatory urodynamics record for up to 12 or 24 hours two pressures with a third (Pdet) also displayed when in analysis mode optional urine loss detector channel simple patient event commenting downloads data into the Acquidata Uromac urodynamics system simple - prompted - step by step setup and download procedure a range of active microtransducer catheters, including miniscule 3F single sensor and 5F dual sensor devices		AcquiLog Specifications Inputs: Two full bridge straingauge (with 5V excitation avaliable) One electrical event for connection to urine loss sensor Event Keys: Six urodynamic specific patient operated buttons urgency urine loss voiding straining deferring voiding notebook log entry mode Recording Time: 12 hours minimum with two pressure transducers and highest sampling rate (Battery Low warning message and audible tone) Pressure Range: 0 Ð 256 cm H 2 0 on both channels (using standard sensitivity 5µV/V/mmHg pressure transducers) Calibration: Menu driven within both the Acquilog to a known applied pressure as well as during analysis on the Aquidata Uromac units conversion menu Zero Balance: Single push button actuation with error message if out of range or an unstable value Display Panel: Allows display of a user defined message display of both pressure channels values at any time display of prompting instructions during setup and data download Download: via serial cable to Acquidata Uromac application on system computer. Analysis features as in standard Uromac UroReport Size: W 11.3 x H 3.3 x D 7.1 cm Weight: 265g (with battery)